createrepo --update /var/localrepo/# 禁用 firewall 和 swap
[root@master ~]# sed '/swap/d' -i /etc/fstab
[root@master ~]# swapoff -a
[root@master ~]# dnf remove -y firewalld-*[root@master ~]# vim /etc/hosts
192.168.1.30 harbor
192.168.1.50 master
192.168.1.51 node-0001
192.168.1.52 node-0002
192.168.1.53 node-0003
192.168.1.54 node-0004
192.168.1.55 node-0005
[root@master ~]# dnf install -y kubeadm kubelet kubectl containerd.io ipvsadm ipset iproute-tc
[root@master ~]# containerd config default >/etc/containerd/config.toml
[root@master ~]# vim /etc/containerd/config.toml
61: sandbox_image = "harbor:443/k8s/pause:3.9"
125: SystemdCgroup = true
154 行新插入:[plugins."io.containerd.grpc.v1.cri".registry.mirrors."docker.io"]endpoint = ["https://harbor:443"][plugins."io.containerd.grpc.v1.cri".registry.mirrors."harbor:443"]endpoint = ["https://harbor:443"][plugins."io.containerd.grpc.v1.cri".registry.configs."harbor:443".tls]insecure_skip_verify = true
[root@master ~]# systemctl enable --now kubelet containerd配置内核参数
# 加载内核模块
[root@master ~]# cat >/etc/modules-load.d/containerd.conf<<EOF
overlay
br_netfilter
xt_conntrack
EOF
[root@master ~]# systemctl start systemd-modules-load.service # 设置内核参数
[root@master ~]# cat >/etc/sysctl.d/99-kubernetes-cri.conf<<EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.netfilter.nf_conntrack_max = 1000000
EOF
[root@master ~]# sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf导入 k8s 镜像
# 拷贝本阶段 kubernetes/init 目录到 master
[root@ecs-proxy s4]# rsync -av kubernetes/init 192.168.1.50:./
[root@master ~]# dnf install -y docker-ce
[root@master ~]# mkdir -p /etc/docker
[root@master ~]# vim /etc/docker/daemon.json
{"registry-mirrors":["https://harbor:443"],"insecure-registries":["harbor:443"]
}
[root@master ~]# systemctl enable --now docker# 登录 harbor 仓库，上传镜像
[root@master ~]# docker login harbor:443
Username: admin
Password: ********
Login Succeeded
[root@master ~]# docker load -i init/v1.26.0.tar.xz
[root@master ~]# docker images|while read i t _;do[[ "${t}" == "TAG" ]] && continue[[ "${i}" =~ ^"harbor:443/".+ ]] && continuedocker tag ${i}:${t} harbor:443/k8s/${i##*/}:${t}docker push harbor:443/k8s/${i##*/}:${t}docker rmi ${i}:${t} harbor:443/k8s/${i##*/}:${t}
done设置 Tab 键
[root@master ~]# source <(kubeadm completion bash|tee /etc/bash_completion.d/kubeadm)
[root@master ~]# source <(kubectl completion bash|tee /etc/bash_completion.d/kubectl)
7、master 安装
# 测试系统环境
[root@master ~]# kubeadm init --config=init/init.yaml --dry-run 2>error.log
[root@master ~]# cat error.log
[root@master ~]# rm -rf error.log /etc/kubernetes/tmp
# 主控节点初始化
[root@master ~]# kubeadm init --config=init/init.yaml |tee init/init.log
# 管理授权
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
# 验证安装结果
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master NotReady control-plane 19s v1.26.0配置控制节点：
k8s里面有一个防火墙，所以会冲突
导入k8s镜像
[root@master ~]# dnf install -y docker-ce
[root@master ~]# mkdir -p /etc/docker
[root@master ~]# vim /etc/docker/daemon.json
{"registry-mirrors":["https://harbor:443"],"insecure-registries":["harbor:443"]
}
[root@master ~]# systemctl enable --now docker# 登录 harbor 仓库，上传镜像
[root@master ~]# docker login harbor:443
Username: admin
Password: ********
Login Succeeded
[root@master ~]# docker load -i init/v1.26.0.tar.xz
[root@master ~]# docker images|while read i t _;do[[ "${t}" == "TAG" ]] && continue[[ "${i}" =~ ^"harbor:443/".+ ]] && continuedocker tag ${i}:${t} harbor:443/k8s/${i##*/}:${t}docker push harbor:443/k8s/${i##*/}:${t}docker rmi ${i}:${t} harbor:443/k8s/${i##*/}:${t}
done
上传镜像的脚本
上传镜像
[root@master ~]# cd plugins/calico
[root@master calico]# docker load -i calico.tar.xz
[root@master calico]# docker images|while read i t _;do[[ "${t}" == "TAG" ]] && continue[[ "${i}" =~ ^"harbor:443/".+ ]] && continuedocker tag ${i}:${t} harbor:443/plugins/${i##*/}:${t}docker push harbor:443/plugins/${i##*/}:${t}docker rmi ${i}:${t} harbor:443/plugins/${i##*/}:${t}
done循环传
<<< 模拟用户交互
<标准输入重定向
<< 多行终止符
6、设置 Tab 键
[root@master ~]# source <(kubeadm completion bash|tee /etc/bash_completion.d/kubeadm)
[root@master ~]# source <(kubectl completion bash|tee /etc/bash_completion.d/kubectl)
7、master 安装
# 测试系统环境
[root@master ~]# kubeadm init --config=init/init.yaml --dry-run 2>error.log
[root@master ~]# cat error.log
[root@master ~]# rm -rf error.log /etc/kubernetes/tmp
# 主控节点初始化
[root@master ~]# kubeadm init --config=init/init.yaml |tee init/init.log
# 管理授权
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
# 验证安装结果
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master NotReady control-plane 19s v1.26.0
