题目：
Fsm serialdata
See also: Serial receiver

Now that you have a finite state machine that can identify when bytes are correctly received in a serial bitstream, add a datapath that will output the correctly-received data byte. out_byte needs to be valid when done is 1, and is don’t-care otherwise.

解题:

module top_module(input clk,input in,input reset,    // Synchronous resetoutput [7:0] out_byte,output done
); //parameter idle=0,start=1,data_receive=2,stop=3,error=4;reg [2:0]state,next_state;reg [3:0]cnt;reg [7:0]out;always@(posedge clk)beginif(reset)state=idle;elsestate=next_state;endalways@(*)begincase(state)idle:next_state=(in==0)?start:idle;start:next_state=data_receive;data_receive:next_state=(cnt==8)?(in?stop:error):data_receive;stop:next_state=in?idle:start;error:next_state=in?idle:error;default:next_state=idle;endcaseendalways@(posedge clk)beginif(reset)cnt=0;else begincase(next_state)start:cnt=0;data_receive:cnt=cnt+1;default:cnt=cnt;endcaseendendalways@(posedge clk)beginif(reset)out=0;else begincase(next_state)start:out=0;data_receive:out={in,out[7:1]};endcaseendendassign done=(state==stop)?1:0;assign out_byte=out;// Use FSM from Fsm_serial// New: Datapath to latch input bits.endmodule

结果正确：

本题在51、52题目的基础上增加了记录数据、计周期数的功能。
即51、52两道题目的结合体。