BuildRoot配置RTL8822CE WIFIBT模块（WIFI部分）

TinkerBoard2主板自带的无线模块为RTL8822CE，PCIe接口

 之前在风火轮下载的Linux源码编译出来的BuildRoot根文件系统没有相关的驱动文件

[root@rk3399:/]# find . -name *.ko
[root@rk3399:/]# lsmod
Module                  Size  Used by    Not tainted
[root@rk3399:/]#

 1、配置无线网卡驱动

在kernel路径下执行make menuconfig，然后按/输入8822，Ok

Symbol: RTL8822CE [=m]                                                                                                                                ││ Type  : tristate                                                                                                                                      ││ Prompt: Realtek 8822C PCIE WiFi                                                                                                                       ││   Location:                                                                                                                                           ││     -> Device Drivers                                                                                                                                 ││       -> Network device support (NETDEVICES [=y])                                                                                                     ││         -> Wireless LAN (WLAN [=y])                                                                                                                   ││           -> Rockchip Wireless LAN support (WL_ROCKCHIP [=y])                                                                                         ││ (3)         -> Realtek Wireless Device Driver Support (RTL_WIRELESS_SOLUTION [=y])                                                                    ││   Defined at drivers/net/wireless/rockchip_wlan/rtl8822ce/Kconfig:1                                                                                   ││   Depends on: NETDEVICES [=y] && WLAN [=y] && WL_ROCKCHIP [=y] && RTL_WIRELESS_SOLUTION [=y] && PCI [=y]

确认配置没问题，RTL8822CE编译成模块，其他配置都有打开

 在8822ce源码目录也确实编译了8822ce.ko驱动文件，但是打包的时候没有拷贝

在Linux_SDK源码目录下执行make menuconfig，没有8822CE选择，而且wifi chip默认选择AWCM256，导致BR2_PACKAGE_RKWIFIBT_VENDOR的值为CYPRESS 

Symbol: BR2_PACKAGE_RKWIFIBT_VENDOR [=CYPRESS]                                                                                                                     ││ Type  : string                                                                                                                                                     ││   Defined at package/rockchip/rkwifibt/Config.in:107                                                                                                               ││   Depends on: BR2_PACKAGE_ROCKCHIP [=y] && BR2_PACKAGE_RKWIFIBT [=y]

修改./buildroot/package/Config.in，添加RTL8822CE模块，并在make menuconfig里面选中

diff --git a/package/rockchip/rkwifibt/Config.in b/package/rockchip/rkwifibt/Config.in
index e3d25606..2adf0f7a 100644
--- a/package/rockchip/rkwifibt/Config.in
+++ b/package/rockchip/rkwifibt/Config.in
@@ -52,6 +52,8 @@ config BR2_PACKAGE_RKWIFIBT_RTL8812AUbool "RTL8812AU"config BR2_PACKAGE_RKWIFIBT_RTL8821CSbool "RTL8821CS"
+config BR2_PACKAGE_RKWIFIBT_RTL8822CE
+    bool "RTL8822CE"config BR2_PACKAGE_RKWIFIBT_RTL8822BEbool "RTL8822BE"config BR2_PACKAGE_RKWIFIBT_RTL8822BS
@@ -96,6 +98,7 @@ config BR2_PACKAGE_RKWIFIBT_CHIPNAMEdefault "RTL8723DS" if BR2_PACKAGE_RKWIFIBT_RTL8723DSdefault "RTL8812AU" if BR2_PACKAGE_RKWIFIBT_RTL8812AUdefault "RTL8821CS" if BR2_PACKAGE_RKWIFIBT_RTL8821CS
+    default "RTL8822CE" if BR2_PACKAGE_RKWIFIBT_RTL8822CEdefault "RTL8822BE" if BR2_PACKAGE_RKWIFIBT_RTL8822BEdefault "RTL8822BS" if BR2_PACKAGE_RKWIFIBT_RTL8822BSdefault "RTL8822BU" if BR2_PACKAGE_RKWIFIBT_RTL8822BU
@@ -126,6 +129,7 @@ config BR2_PACKAGE_RKWIFIBT_VENDORdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8723DSdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8821CSdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8812AU
+    default "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8822CEdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8822BEdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8822BSdefault "REALTEK" if BR2_PACKAGE_RKWIFIBT_RTL8822BU
@@ -155,6 +159,7 @@ config BR2_PACKAGE_RKWIFIBT_WIFI_KOdefault "8723cs.ko" if BR2_PACKAGE_RKWIFIBT_RTL8723CSdefault "8723ds.ko" if BR2_PACKAGE_RKWIFIBT_RTL8723DSdefault "8812au.ko" if BR2_PACKAGE_RKWIFIBT_RTL8812AU
+    default "8822ce.ko" if BR2_PACKAGE_RKWIFIBT_RTL8822CEdefault "8822be.ko" if BR2_PACKAGE_RKWIFIBT_RTL8822BEdefault "8822bs.ko" if BR2_PACKAGE_RKWIFIBT_RTL8822BSdefault "8822bu.ko" if BR2_PACKAGE_RKWIFIBT_RTL8822BU

添加以下四个package

  • iw: 可用于OPEN、WEP这两种"认证/加密"，以及扫描WIFI热点等；

  • wpa_supplicant: 可用于前面4种"认证/加密"；

  • hostapd: 能够使得无线网卡切换为AP模式；

  • dhcp: STA模式使WIFI网卡动态获取IP，AP模式分配IP；

diff --git a/configs/rockchip_rk3399_tinkerboard2_defconfig b/configs/rockchip_rk3399_tinkerboard2_defconfig
index 969059f3..3bc52487 100644
--- a/configs/rockchip_rk3399_tinkerboard2_defconfig
+++ b/configs/rockchip_rk3399_tinkerboard2_defconfig
@@ -20,4 +20,14 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to RK3399 Buildroot"BR2_TARGET_GENERIC_GETTY_PORT="ttyFIQ0"BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=yBR2_PACKAGE_WIFIAUTOSETUP=y
+BR2_PACKAGE_RKWIFIBT_RTL8822CE=yBR2_PACKAGE_RKWIFIBT_BTUART="ttyS0"
+BR2_PACKAGE_LIBBSD=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_SERVER=y
+BR2_PACKAGE_DHCP_SERVER_DELAYED_ACK=y
+BR2_PACKAGE_DHCP_RELAY=y
+BR2_PACKAGE_DHCP_CLIENT=y
+BR2_PACKAGE_HOSTAPD_DRIVER_RTW=y
+BR2_PACKAGE_HOSTAPD_EAP=y
+BR2_PACKAGE_HOSTAPD_WPS=y

2、直接拷贝手动加载驱动 

[root@rk3399:/]# cp /media/usb1/8822ce.ko /vendor/lib/modules/
[root@rk3399:/]# sync
[root@rk3399:/]# insmod /vendor/lib/modules/8822ce.ko
[ 2992.171377] RTW: module init start
[ 2992.172628] RTW: rtl88x2ce v5.12.1.8-2-g58609677a.20210923_COEX20210504-2323
[ 2992.173898] RTW: build time: Jan 10 2024 22:21:16
[ 2992.175185] RTW: rtl88x2ce BT-Coex version = COEX20210504-2323
[ 2992.176933] RTW: [HALMAC]55772M
[ 2992.176933] HALMAC_MAJOR_VER = 1
[ 2992.176933] HALMAC_PROTOTYPE_VER = 6
[ 2992.176933] HALMAC_MINOR_VER = 6
[ 2992.176933] HALMAC_PATCH_VER = 22
[ 2992.182655] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[ 2992.187375] RTW: HW EFUSE
[ 2992.188503] RTW: 0x000: 29 81 00 8F  FF 20 0B 00  98 04 E4 35  10 03 F1 EB
[ 2992.189620] RTW: 0x010: 4F 4F 51 51  52 52 46 46  49 49 49 02  00 00 FF FF
[ 2992.190808] RTW: 0x020: FF FF 54 53  54 53 51 4F  4E 4C 4D 4D  4C 4D 4D 4E
[ 2992.192019] RTW: 0x030: 02 00 FF FF  00 FF 00 00  FF FF 59 59  5B 5C 5D 5E
[ 2992.193222] RTW: 0x040: 4D 4E 50 50  51 02 00 00  FF FF FF FF  4F 50 53 52
[ 2992.194461] RTW: 0x050: 55 53 52 50  51 51 4F 4F  50 50 02 00  FF FF 00 FF
[ 2992.195636] RTW: 0x060: 00 00 FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.196810] RTW: 0x070: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.198069] RTW: 0x080: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.199197] RTW: 0x090: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF F[root@rk3399:/]# F
[ 2992.200344] RTW: 0x0A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.201508] RTW: 0x0B0: FF FF FF FF  FF FF FF FF  7F 44 FF 00  FF FF FF FF
[ 2992.202549] RTW: 0x0C0: FF 21 00 11  00 00 FF FF  00 33 01 FF  FF FF FF FF
[ 2992.203519] RTW: 0x0D0: 20 20 FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.204509] RTW: 0x0E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.205386] RTW: 0x0F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.206234] RTW: 0x100: F0 94 65 D3  58 C5 FF FF  CD F0 FF FF  FF FF FF FF
[ 2992.207099] RTW: 0x110: 44 44 FC A0  D8 D8 FD FF  35 8C FF FF  FF FF FF FF
[ 2992.207997] RTW: 0x120: 48 E7 DA 0A  F3 3D EC 10  22 C8 3B 1A  50 37 FF FF
[ 2992.208858] RTW: 0x130: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.209675] RTW: 0x140: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.210539] RTW: 0x150: D3 13 48 35  FF 5E 02 00  FF FF FF FF  FF FF FF FF
[ 2992.211438] RTW: 0x160: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.212297] RTW: 0x170: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.213119] RTW: 0x180: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.213908] RTW: 0x190: 01 FE FF FF  00 00 00 0F  FF FF FF FF  FF FF FF FF
[ 2992.214761] RTW: 0x1A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.215624] RTW: 0x1B0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.216434] RTW: 0x1C0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.217313] RTW: 0x1D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.218187] RTW: 0x1E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.219015] RTW: 0x1F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.219762] RTW: 0x200: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.220480] RTW: 0x210: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.221237] RTW: 0x220: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.221916] RTW: 0x230: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.222522] RTW: 0x240: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.223093] RTW: 0x250: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.223689] RTW: 0x260: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.224284] RTW: 0x270: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.224864] RTW: 0x280: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.225421] RTW: 0x290: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.225959] RTW: 0x2A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.226482] RTW: 0x2B0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.227048] RTW: 0x2C0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.227573] RTW: 0x2D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.228077] RTW: 0x2E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.228567] RTW: 0x2F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[ 2992.229034] RTW: hal_com_config_channel_plan chplan:0x7F
[ 2992.251030] RTW: [RF_PATH] ver_id.RF_TYPE:RF_2T2R
[ 2992.251500] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x33, rf_reg_path_avail_num:2, max_tx_cnt:2
[ 2992.251952] RTW: [RF_PATH] PG's trx_path_bmp:0x33, max_tx_cnt:0
[ 2992.252423] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0
[ 2992.252921] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x33, max_tx_cnt:2
[ 2992.253428] RTW: [RF_PATH] HALDATA's rf_type:RF_2T2R, NumTotalRFPath:2
[ 2992.253941] RTW: [TRX_Nss] HALSPEC - tx_nss:2, rx_nss:2
[ 2992.254481] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0
[ 2992.255016] RTW: [TRX_Nss] HALDATA - tx_nss:2, rx_nss:2
[ 2992.255551] RTW: txpath=0x3, rxpath=0x3
[ 2992.256081] RTW: txpath_1ss:0x1, num:1
[ 2992.256623] RTW: txpath_2ss:0x3, num:2
[ 2992.268911] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[ 2992.277479] RTW: rtw_ndev_init(wlan0) if1 mac_addr=48:e7:da:0a:f3:3d
[ 2992.279547] RTW: module init ret=0
[ 2992.285783] rtl88x2ce 0000:01:00.0 wlp1s0: renamed from wlan0[root@rk3399:/]# ifconfig -a
dummy0    Link encap:Ethernet  HWaddr E2:27:05:47:24:21inet6 addr: fe80::6cc4:9189:94b6:f8e1/64 Scope:LinkUP BROADCAST RUNNING NOARP  MTU:1500  Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:16 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:0 (0.0 B)  TX bytes:4384 (4.2 KiB)eth0      Link encap:Ethernet  HWaddr 7C:10:C9:ED:C6:8DUP BROADCAST MULTICAST  MTU:1500  Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:0 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)Interrupt:27lo        Link encap:Local Loopbackinet addr:127.0.0.1  Mask:255.0.0.0inet6 addr: ::1/128 Scope:HostUP LOOPBACK RUNNING  MTU:65536  Metric:1RX packets:1456 errors:0 dropped:0 overruns:0 frame:0TX packets:1456 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:105280 (102.8 KiB)  TX bytes:105280 (102.8 KiB)wlp1s0    Link encap:Ethernet  HWaddr 48:E7:DA:0A:F3:3DBROADCAST MULTICAST  MTU:1500  Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:0 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)[root@rk3399:/]#

 驱动加载成功，也创建了无线接口wlp1s0(无线第1号PCIe扩展卡的0号端口)

修改/usr/bin/wifi_start.sh测试

#!/bin/sh
WIFISSID=$1
WIFIPWD=$2
CONF=/tmp/wpa_supplicant.confcp /etc/wpa_supplicant.conf /tmp/
echo "connect to WiFi ssid: $WIFISSID, Passwd: $WIFIPWD"
sed -i "s/SSID/$WIFISSID/g" $CONF
sed -i "s/PASSWORD/$WIFIPWD/g" $CONF
killall wpa_supplicant
sleep 1
wpa_supplicant -B -i wlp1s0 -c $CONF

运行结果

[root@rk3399:/]# wifi_start.sh CMCC-VwMh 6fGWREFq
connect to WiFi ssid: CMCC-VwMh, Passwd: 6fGWREFq
killall: wpa_supplicant: no process killed
Successfully initialized wpa_supplicant
[ 3609.276343] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[ 3609.278015] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[root@rk3399:/]# [ 3613.244527] RTW: rtw_set_802_11_connect(wlp1s0)  fw_state=0x00000008
[ 3613.355782] RTW: start auth
[ 3613.364209] RTW: auth success, start assoc
[ 3613.375036] RTW: assoc success
[ 3613.378485] RTW: ============ STA [ac:54:74:d2:65:9e]  ===================
[ 3613.380759] RTW: mac_id : 0
[ 3613.382867] RTW: wireless_mode : 0x0b
[ 3613.385043] RTW: mimo_type : 2
[ 3613.387223] RTW: static smps : N
[ 3613.389403] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz
[ 3613.391682] RTW: rate_id : 2
[ 3613.393963] RTW: rssi : -1 (%), rssi_level : 0
[ 3613.396285] RTW: is_support_sgi : Y, is_vht_enable : N
[ 3613.398610] RTW: disable_ra : N, disable_pt : N
[ 3613.400926] RTW: is_noisy : N
[ 3613.403174] RTW: txrx_state : 0
[ 3613.405324] RTW: curr_tx_rate : CCK_1M (L)
[ 3613.407470] RTW: curr_tx_bw : 20MHz
[ 3613.409538] RTW: curr_retry_ratio : 0
[ 3613.411614] RTW: ra_mask : 0x000000000fffffff
[ 3613.411614]
[ 3622.475076] RTW: OnDeAuth(wlp1s0) reason=15, ta=ac:54:74:d2:65:9e, ignore=0
[ 3626.433364] RTW: nolinked power save enter
[ 3626.644748] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[ 3626.649229] RTW: nolinked power save leave
[ 3626.652990] RTW: rtw_set_802_11_connect(wlp1s0)  fw_state=0x00000008
[ 3626.770382] RTW: start auth
[ 3626.779375] RTW: auth success, start assoc
[ 3626.790531] RTW: assoc success
[ 3626.794589] RTW: ============ STA [ac:54:74:d2:65:9e]  ===================
[ 3626.797887] RTW: mac_id : 0
[ 3626.800965] RTW: wireless_mode : 0x0b
[ 3626.803972] RTW: mimo_type : 2
[ 3626.806923] RTW: static smps : N
[ 3626.809840] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz
[ 3626.812790] RTW: rate_id : 2
[ 3626.815673] RTW: rssi : -1 (%), rssi_level : 0
[ 3626.818532] RTW: is_support_sgi : Y, is_vht_enable : N
[ 3626.821451] RTW: disable_ra : N, disable_pt : N
[ 3626.824380] RTW: is_noisy : N
[ 3626.827329] RTW: txrx_state : 0
[ 3626.830223] RTW: curr_tx_rate : CCK_1M (L)
[ 3626.833122] RTW: curr_tx_bw : 20MHz
[ 3626.835966] RTW: curr_retry_ratio : 0
[ 3626.838797] RTW: ra_mask : 0x000000000fffffff
[ 3626.838797]
[ 3626.886292] RTW: recv eapol packet 1/4
[ 3626.894257] RTW: send eapol packet 2/4
[ 3626.904935] RTW: recv eapol packet 3/4
[ 3626.906945] RTW: send eapol packet 4/4
[ 3626.909115] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 3626.909265] RTW: set pairwise key camid:0, addr:ac:54:74:d2:65:9e, kid:0, type:AES
[ 3626.912977] RTW: set group key camid:1, addr:ac:54:74:d2:65:9e, kid:1, type:TKIP[root@rk3399:/]# ifconfig
dummy0    Link encap:Ethernet  HWaddr E2:27:05:47:24:21inet6 addr: fe80::6cc4:9189:94b6:f8e1/64 Scope:LinkUP BROADCAST RUNNING NOARP  MTU:1500  Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:16 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:0 (0.0 B)  TX bytes:4384 (4.2 KiB)eth0      Link encap:Ethernet  HWaddr 7C:10:C9:ED:C6:8DUP BROADCAST MULTICAST  MTU:1500  Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:0 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)Interrupt:27lo        Link encap:Local Loopbackinet addr:127.0.0.1  Mask:255.0.0.0inet6 addr: ::1/128 Scope:HostUP LOOPBACK RUNNING  MTU:65536  Metric:1RX packets:1784 errors:0 dropped:0 overruns:0 frame:0TX packets:1784 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:129552 (126.5 KiB)  TX bytes:129552 (126.5 KiB)wlp1s0    Link encap:Ethernet  HWaddr 48:E7:DA:0A:F3:3Dinet6 addr: fe80::4ae7:daff:fe0a:f33d/64 Scope:Linkinet6 addr: 2409:8a55:8843:cd00:4ae7:daff:fe0a:f33d/64 Scope:GlobalUP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1RX packets:7 errors:0 dropped:0 overruns:0 frame:0TX packets:9 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:1242 (1.2 KiB)  TX bytes:1094 (1.0 KiB)[root@rk3399:/]#

没有分配IPv4地址，网络不通

[root@rk3399:/]# ping 192.168.1.14
connect: Network is unreachable
手动配置一下IP，可以ping通代码服务器

[root@rk3399:/]# ifconfig wlp1s0 192.168.1.40 netmask 255.255.255.0
[root@rk3399:/]# ping 192.168.1.14
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=6.78 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=2.53 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=70.3 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.15 ms
^C
--- 192.168.1.14 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 2.532/20.713/70.384/28.723 ms

想要访问外网还需要配置默认网关和DNS

[root@rk3399:/]# route add default gw 192.168.1.1
[root@rk3399:/]# vi /etc/resolv.conf
# Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this linenameserver 114.114.114.114
nameserver 192.168.1.1# 保存退出
[root@rk3399:/]# ping www.baidu.com
PING www.baidu.com(2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:a                                                                              d75)) 56 data bytes
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75):                                                                               icmp_seq=1 ttl=54 time=83.0 ms
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75):                                                                               icmp_seq=2 ttl=54 time=105 ms
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75):                                                                               icmp_seq=3 ttl=54 time=19.7 ms
^C
--- www.baidu.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 19.766/69.520/105.783/36.389 ms

3、使用dhclient配置

执行wifi_start.sh连接网络后可以使用dhclient自动配置IP地址和DNS 

[root@rk3399:/]# dhclient wlp1s0
[root@rk3399:/]# ifconfig wlp1s0
wlp1s0    Link encap:Ethernet  HWaddr 48:E7:DA:0A:F3:3Dinet addr:192.168.1.11  Bcast:192.168.1.255  Mask:255.255.255.0inet6 addr: 2409:8a55:8843:cd00:a9cf:5754:f3a0:c8a3/64 Scope:Globalinet6 addr: fe80::94c4:6894:f0cf:6c41/64 Scope:LinkUP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1RX packets:356 errors:0 dropped:0 overruns:0 frame:0TX packets:38 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:183258 (178.9 KiB)  TX bytes:5181 (5.0 KiB)[root@rk3399:/]# ping www.baidu.com
PING www.baidu.com(2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75)) 56 data bytes
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75): icmp_seq=1 ttl=54 time=89.6 ms
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75): icmp_seq=2 ttl=54 time=27.7 ms
64 bytes from 2409:8c54:870:67:0:ff:b0c2:ad75 (2409:8c54:870:67:0:ff:b0c2:ad75): icmp_seq=3 ttl=54 time=30.1 ms
^C
--- www.baidu.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 27.748/49.202/89.684/28.642 ms
[root@rk3399:/]# cat /etc/resolv.conf
resolv.conf           resolv.conf.dhclient
[root@rk3399:/]# cat /etc/resolv.conf
nameserver 192.168.1.1
[root@rk3399:/]# cat /etc/resolv.conf.dhclient
nameserver 192.168.1.1
[root@rk3399:/]#

wifi_start.sh改为

#!/bin/sh
WIFISSID=$1
WIFIPWD=$2
CONF=/tmp/wpa_supplicant.confcp /etc/wpa_supplicant.conf /tmp/
echo "connect to WiFi ssid: $WIFISSID, Passwd: $WIFIPWD"
sed -i "s/SSID/$WIFISSID/g" $CONF
sed -i "s/PASSWORD/$WIFIPWD/g" $CONF
killall wpa_supplicant
sleep 1
wpa_supplicant -B -i wlp1s0 -c $CONF
sleep 5
dhclient wlp1s0

 4、编译时自动拷贝8822ce.ko

修改./buildroot/package/rockchip/rkwifibt/rkwifibt.mk，编译buildroot时就可以拷贝8822ce.ko到buildroot/output/rockchip_rk3399_tinkerboard2/target/system/lib/modules/8822ce.ko，我是执行rm -rf ./buildroot/output/后再编译buildroot的(此方法编译时间比较长，而且之前遇到错误还需要重新处理，可以使用下面的方法)

diff --git a/package/rockchip/rkwifibt/rkwifibt.mk b/package/rockchip/rkwifibt/rkwifibt.mk
index b50465df..aab7637a 100644
--- a/package/rockchip/rkwifibt/rkwifibt.mk
+++ b/package/rockchip/rkwifibt/rkwifibt.mk
@@ -46,6 +46,7 @@ define RKWIFIBT_INSTALL_COMMON$(INSTALL) -D -m 0755 $(@D)/wifi_start.sh $(TARGET_DIR)/usr/bin/$(INSTALL) -D -m 0755 $(@D)/wifi_ap6xxx_rftest.sh $(TARGET_DIR)/usr/bin/$(INSTALL) -D -m 0755 $(@D)/src/rk_wifi_init $(TARGET_DIR)/usr/bin/
+    $(INSTALL) -D -m 0644 $(TOPDIR)/../kernel/drivers/net/wireless/rockchip_wlan/rtl8822ce/*.ko $(TARGET_DIR)/vendor/lib/modules/$(SED) 's/WIFI_KO/\/$(FIRMWARE_DIR)\/lib\/modules\/$(BR2_PACKAGE_RKWIFIBT_WIFI_KO)/g' $(@D)/$(SXLOAD_WIFI)$(SED) 's/BT_TTY_DEV/\/dev\/$(BT_TTY_DEV)/g' $(@D)/$(SXLOAD_WIFI)-$(INSTALL) -D -m 0755 $(@D)/$(SXLOAD_WIFI) $(TARGET_DIR)/etc/init.d/

网上也有说如果需要重新编译某个package可以删除.stamp_相关的文件或make clean，如

rkwifibt-1.0.0，rm -rf buildroot/output/rockchip_rk3399_tinkerboard2/build/rkwifibt-1.0.0/.stamp_*

开机自动加载wifi驱动（自动加载的.ko文件是根据./buildroot/package/Config.in配置的BR2_PACKAGE_RKWIFIBT_WIFI_KO属性）

Starting system message bus: done
/etc/init.d/S36load_wifi_modules: line 43: can't create /sys/class/rfkill/rfkill1/state: nonexistent directory
wpa_supplicant.conf init
wpa_supplicant.conf init
[    7.390571] RTW: module init start
[    7.392032] RTW: rtl88x2ce v5.12.1.8-2-g58609677a.20210923_COEX20210504-2323
[    7.393456] RTW: build time: Jan 12 2024 17:07:15
[    7.394828] RTW: rtl88x2ce BT-Coex version = COEX20210504-2323
[    7.396891] rtl88x2ce 0000:01:00.0: enabling device (0000 -> 0002)
[    7.398580] RTW: [HALMAC]55772M
[    7.398580] HALMAC_MAJOR_VER = 1
[    7.398580] HALMAC_PROTOTYPE_VER = 6
[    7.398580] HALMAC_MINOR_VER = 6
[    7.398580] HALMAC_PATCH_VER = 22
[    7.403342] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[    7.407825] RTW: HW EFUSE
[    7.408752] RTW: 0x000: 29 81 00 8F  FF 20 0B 00  98 04 E4 35  10 03 F1 EB
[    7.409672] RTW: 0x010: 4F 4F 51 51  52 52 46 46  49 49 49 02  00 00 FF FF
[    7.410637] RTW: 0x020: FF FF 54 53  54 53 51 4F  4E 4C 4D 4D  4C 4D 4D 4E
[    7.411596] RTW: 0x030: 02 00 FF FF  00 FF 00 00  FF FF 59 59  5B 5C 5D 5E
[    7.412579] RTW: 0x040: 4D 4E 50 50  51 02 00 00  FF FF FF FF  4F 50 53 52
[    7.413552] RTW: 0x050: 55 53 52 50  51 51 4F 4F  50 50 02 00  FF FF 00 FF
[    7.414544] RTW: 0x060: 00 00 FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.415565] RTW: 0x070: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.416580] RTW: 0x080: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.417538] RTW: 0x090: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.418489] RTW: 0x0A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.419420] RTW: 0x0B0: FF FF FF FF  FF FF FF FF  7F 44 FF 00  FF FF FF FF
[    7.420283] RTW: 0x0C0: FF 21 00 11  00 00 FF FF  00 33 01 FF  FF FF FF FF
[    7.421161] RTW: 0x0D0: 20 20 FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.422036] RTW: 0x0E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.422920] RTW: 0x0F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.423793] RTW: 0x100: F0 94 65 D3  58 C5 FF FF  CD F0 FF FF  FF FF FF FF
[    7.424657] RTW: 0x110: 44 44 FC A0  D8Start ing network: D8 FD FF  35 8C FF FF  FF FF FF FF
[    7.425522] RTW: 0x120: 48 E7 DA 0A  F3 3D EC 10  22 C8 3B 1A  50 37 FF FF
[    7.426390] RTW: 0x130: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.427250] RTW: 0x140: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.428100] RTW: 0x150: D3 13 48 35  FF 5E 02 00  FF FF FF FF  FF FF FF FF
[    7.428943] RTW: 0x160: FF FF FF FF  FF FF FOK
F FF  FF FF FF FF  FF FF FStarting dhcpcd...
F FF
[    7.429793] RTW: 0x170: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.430584] RTW: 0x180: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.431328] RTW: 0x190: 01 FE FF FF  00 00 00 0F  FF FF FF FF  FF FF FF FF
[    7.432099] RTW: 0x1A0: FF FF dev: loaded udev
FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.432889] RTW: 0x1B0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.433654] RTW: 0x1C0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.434430] RTW: 0x1D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.435165] RTW: 0x1E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.435932] RTW: 0x1F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.436634] RTW: 0x200: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.437290] RTW: 0x210: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.437935] RTW: 0x220: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.438546] RTW: 0x230: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.439151] RTW: 0x240: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.439709] RTW: 0x250: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.440235] RTW: 0x260: FF FF FF FF  FF FF FF FF  FF FF FF FF no interfac es have a carrieFr
F FF forked to background, child pid 540
FF FF
[    7.440757] RTW: 0x270: FF FF FF FF  FF FF FF FFStarting ntpd:   FF FF FF FF  FF FF FF FF
[    7.441279] RTW: 0x280: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.441805] RTW: 0x290: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.442332] RTW: 0x2A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.442882] RTW: 0x2B0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.443378] RTW: 0x2C0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.443854] RTW: 0x2D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.444322] RTW: 0x2E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.444794] RTW: 0x2F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[    7.445263] RTW: hal_com_config_channel_plan chplan:0x7F
[    7.467777] BUG: spinlock bad magic on CPU#5, insmod/499
[    7.468246]  lock: 0xffffffc079517460, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    7.468682] CPU: 5 PID: 499 Comm: insmod Not tainted 4.19.193 #11
[    7.469147] Hardware name: ASUS Tinker Board 2/2S (DT)
[    7.OK
469617] Call trace:
[    7.470111]  dump_backtrace+0x0/0x188
[    7.470585]  show_stack+0x24/0x30
[    7.471080]  dump_stack+0x8c/0xb4
[    7.471557]  spin_bug+0x88/0xa8
[    7.472014]  do_raw_spin_lock+0x3c/0xd8
[    7.472499]  _raw_spin_lock_irqsave+0xStarting dropbea2 sshd: 8/0x38
[    7.473113]  rtl8822ce_reset_bd+0x74/0x174 [8822ce]
[    7.473715]  rtw_hal_irp_reset+0x28/0x34 [8822ce]
[    7.474301]  init_mac_flow+0x90/0x164 [8822ce]
[    7.474915]  rtw_halmac_dlfw+0x94/0xc4 [8822ce]
[    7.475542]  rtl8822c_fw_dl+0x50/0x184 [8822ce]
[    7.476175]  rtw_hal_fw_dl+0x2c/0x40 [8822ce]
[    7.476829]  hal_read_mac_hidden_rpt+0x138/0x2e0 [8822ce]
[    7.477508]  rtl8822c_read_efuse+0xeac/0xf38 [8822ce]
[    7.478189]  read_adapter_info+0x20/0x38 [8822ce]
[    7.478906]  rtw_hal_read_chip_info+0xc0/0xe8 [8822ce]
[    7.479656]  rtw_pci_primary_adapter_init+0x110/0x1fc [8822ce]
[    7.480424]  rtw_drv_init+0xb10/0xbc8 [8822ce]
[    7.481133]  pci_device_probe+0xbc/0x12c
[    7.481842]  really_probe+0x2a8/0x3a4
[    7.482556]  driver_probe_device+0x124/0x134
[    7.483285]  device_driver_attach+0x50/0x7c
[    7.484040]  __driver_attach+0x13c/0x140
[    7.484811]  bus_for_each_dev+0x8c/0xd4
[    7.485594]  driver_attach+0x30/0x3c
[    7.486379]  bus_add_driver+0x1b4/0x1f8
[    7.487158]  driver_register+0xb8/0xf0
[    7.487921]  __pci_register_driver+0x70/0x80
[    7.488737]  rtw_drv_entry+0xa4/0x1000 [8822ce]
[    7.489473]  do_one_initcall+0xa0/0x1c0
[    7.490212]  do_init_module+0x64/0x1f4
[    7.490937]  load_module+0x1ac8/0x1c14
[    7.491654]  __se_sys_finit_module+0xd8/0xf4
[    7.492438]  __arm64_sys_finit_module+0x24/0x30
[    7.493207]  el0_svc_common.constprop.0+0xe8/0x168
[    7.493961]  el0_svc_handler+0x70/0x8c
[    7.494705]  el0_svc+0x8/0xc
[    7.496372] RTW: [RF_PATH] ver_id.RF_TYPE:RF_2T2R
[    7.497170] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x33, rf_reg_path_avail_num:2, max_tx_cnt:2
[    7.498004] RTW: [RF_PATH] PG's trx_path_bmp:0x33, max_tx_cnt:0
[    7.498856] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0
[    7.499758] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x33, max_tx_cnt:2
[    7.500627] RTW: [RF_PATH] HALDATA's rf_type:RF_2T2R, NumTotalRFPath:2
[    7.501491] RTW: [TRX_Nss] HALSPEC - tx_nss:2, rx_nss:2
[    7.502399] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0
[    7.503305] RTW: [TRX_Nss] HALDATA - tx_nss:2, rx_nss:2
[    7.504174] RTW: txpath=0x3, rxpath=0x3
[    7.505014] RTW: txpath_1ss:0x1, num:1
[    7.505847] RTW: txpath_2ss:0x3, num:2
[    7.526205] RTW: ADAPTIVITY_VERSION 9.7.07
[    7.527007] RTW: RTW_ADAPTIVITY_EN_ENABLE
[    7.527746] RTW: RTW_ADAPTIVITY_MODE_NORMAL
[    7.528579] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[    7.545447] RTW: rtw_ndev_init(wlan0) if1 mac_addr=48:e7:da:0a:f3:3d
[    7.547133] RTW: rtw_ndev_init(p2p0) if2 mac_addr=4a:e7:da:0a:f3:3d
[    7.549147] RTW: module init ret=0
[    7.552201] rtl88x2ce 0000:01:00.0 wlp1s0: renamed from wlan0
OK
[    7.585898] udevd[158]: Error changing net interface name p2p0 to wlp1s0: File exists
[    7.586966] udevd[158]: could not rename interface '5' from 'p2p0' to 'wlp1s0': File exists
[    7.723Starting launcher: 207] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    7.735214] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[    7.736268] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported byDebug: configfs_initHW
[    7.737371] [WOL] wakeup enable
[    7.737489] ===========wol_io_isr
[    7.738686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.078575] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[    8.080532] IPv6: ADDRCmkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gOs0':N No Fsuch( file or directory
NETDEV_UP): wlp1s0: link is not ready
[    8.081755] Imkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
Pv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[    8.182043] file system registered
mkdir: cannot create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
[    8.199879] using random self ethernet address
[    8.201141] Read the Ethernet MAC address from EEPROM:

 连接WIFI后自动分配IP

[root@rk3399:/]# wifi_start.sh CMCC-VwMh 6fGWREFq
connect to WiFi ssid: CMCC-VwMh, Passwd: 6fGWREFq
killall: wpa_supplicant: no process killed
Successfully initialized wpa_supplicant
[  280.788331] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[  280.790992] RTW: nolinked power save leave
[  284.622110] RTW: nolinked power save enter
[  284.833030] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[  284.837537] RTW: nolinked power save leave
[  284.841183] RTW: rtw_set_802_11_connect(wlp1s0)  fw_state=0x00000008
[  285.007434] RTW: start auth
[  285.017692] RTW: auth success, start assoc
[  285.028840] RTW: assoc success
[  285.033748] RTW: ============ STA [ac:54:74:d2:65:9e]  ===================
[  285.034887] RTW: mac_id : 0
[  285.035917] RTW: wireless_mode : 0x0b
[  285.036914] RTW: mimo_type : 2
[  285.037889] RTW: static smps : N
[  285.038889] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz
[  285.039848] RTW: rate_id : 2
[  285.040779] RTW: rssi : -1 (%), rssi_level : 0
[  285.041713] RTW: is_support_sgi : Y, is_vht_enable : N
[  285.042718] RTW: disable_ra : N, disable_pt : N
[  285.043708] RTW: is_noisy : N
[  285.044704] RTW: txrx_state : 0
[  285.045720] RTW: curr_tx_rate : CCK_1M (L)
[  285.046719] RTW: curr_tx_bw : 20MHz
[  285.047709] RTW: curr_retry_ratio : 0
[  285.048701] RTW: ra_mask : 0x000000000fffffff
[  285.048701]
[  285.122332] RTW: recv eapol packet 1/4
[  285.130736] RTW: send eapol packet 2/4
[  285.146426] RTW: recv eapol packet 3/4
[  285.148432] RTW: send eapol packet 4/4
[  285.150559] RTW: set pairwise key camid:0, addr:ac:54:74:d2:65:9e, kid:0, type:AES
[  285.150717] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  285.152697] RTW: set group key camid:1, addr:ac:54:74:d2:65:9e, kid:1, type:TKIP
[root@rk3399:/]# ifconfig wlp1s0
wlp1s0    Link encap:Ethernet  HWaddr 48:E7:DA:0A:F3:3Dinet addr:192.168.1.11  Bcast:192.168.1.255  Mask:255.255.255.0inet6 addr: 2409:8a55:8843:cd00:503a:defc:a86c:7274/64 Scope:Globalinet6 addr: fe80::254e:7928:f2ce:ae29/64 Scope:LinkUP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1RX packets:234 errors:0 dropped:0 overruns:0 frame:0TX packets:35 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:119722 (116.9 KiB)  TX bytes:5241 (5.1 KiB)[root@rk3399:/]# ping www.baidu.com
PING www.baidu.com(2409:8c54:870:34e:0:ff:b024:1916 (2409:8c54:870:34e:0:ff:b024:1916)) 56 data bytes
64 bytes from 2409:8c54:870:34e:0:ff:b024:1916 (2409:8c54:870:34e:0:ff:b024:1916): icmp_seq=1 ttl=54 time=96.9 ms
64 bytes from 2409:8c54:870:34e:0:ff:b024:1916 (2409:8c54:870:34e:0:ff:b024:1916): icmp_seq=2 ttl=54 time=121 ms
64 bytes from 2409:8c54:870:34e:0:ff:b024:1916 (2409:8c54:870:34e:0:ff:b024:1916): icmp_seq=3 ttl=54 time=20.7 ms
64 bytes from 2409:8c54:870:34e:0:ff:b024:1916 (2409:8c54:870:34e:0:ff:b024:1916): icmp_seq=4 ttl=54 time=22.8 ms
^C
--- www.baidu.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 20.741/65.414/121.129/44.474 ms

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.rhkb.cn/news/240175.html

如若内容造成侵权/违法违规/事实不符，请联系长河编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

UI设计中插画赏析和产品色彩分析

UI设计中插画赏析和产品色彩分析

插画赏析&#xff1a; 1. 插画是设计的原创性和艺术性的基础 无论是印刷品、品牌设计还是UI界面&#xff0c;更加风格化的插画能够将不同的风格和创意加入其中&#xff0c;在激烈的竞争中更容易因此脱颖而出。留下用户才有转化。 2. 插画是视觉触发器&#xff0c;瞬间传达大量…
阅读更多...
ARM day1

ARM day1

一、概念 ARM可以工作的七种模式用户、系统、快中断、中断、管理、终止、未定义ARM核的寄存器个数 37个32位长的寄存器&#xff0c;当前处理器的模式决定着哪组寄存器可操作&#xff0c;且任何模式都可以存取&#xff1a; PC(program counter程序计数器) CPSR(current program…
阅读更多...
自存angular cli创建分区的module

自存angular cli创建分区的module

创建module ng g module /admin/promotion --routing 目标文件夹下会有 正常创建组件 在上一级路由中写 promotion的路由 {path: "promotion", //推广loadChildren: () >import("./promotion/promotion.module").then((m) > m.PromotionModul…
阅读更多...
详解React与Vue的性能对比

详解React与Vue的性能对比

React 和 Vue 是当前最流行的前端开发框架之一。它们都具有高度的灵活性和可扩展性&#xff0c;但在某些方面有所不同。在本篇文章中&#xff0c;我将详细介绍 React 和 Vue 这两个技术&#xff0c;并比较它们的优点和缺点。 目录 1. React&#xff1a; 1.1 优点&#xff1a; …
阅读更多...
力扣白嫖日记(sql)

力扣白嫖日记(sql)

前言 练习sql语句&#xff0c;所有题目来自于力扣&#xff08;https://leetcode.cn/problemset/database/&#xff09;的免费数据库练习题。 今日题目&#xff1a; 586.订单最多的客户 表&#xff1a;Orders 列名类型order_numberintcustomer_numberint 查找下了最多订单的…
阅读更多...
QT第五天

QT第五天

使用QT绘图和绘图事件&#xff0c;完成仪表盘绘图&#xff0c;如下图&#xff1a; 程序运行结果&#xff1a; 代码&#xff1a; widget.h #ifndef WIDGET_H #define WIDGET_H#include <QWidget> #include <QPainter> #include <QPen> #include <QBrush&…
阅读更多...
PDF 文档解除密码

PDF 文档解除密码

PDF 文档解除密码 1. 文件 -> 文档属性 -> 安全 -> 文档限制摘要2. PDF365References 1. 文件 -> 文档属性 -> 安全 -> 文档限制摘要 密码保护《算法设计与分析基础_第3版.pdf》 2. PDF365 https://www.pdf365.cn/ 免费功能 -> PDF 去密码 开始去除 Re…
阅读更多...
MySQL入门篇：事物操作（开启事物，提交事物，回滚事物），事物四大特性（ACID），并发事物问题（脏读，不可重复读，幻读），事物隔离级别

MySQL入门篇：事物操作（开启事物，提交事物，回滚事物），事物四大特性（ACID），并发事物问题（脏读，不可重复读，幻读），事物隔离级别

目录 1.事物简介2.事物操作1.查看/设置事物提交方式&#xff08;方式1&#xff09;2.开启事物&#xff08;方式2&#xff09;3.提交事物4.回滚事物 3.事物四大特性(ACID)1.原子性&#xff08;Atomicity)2.一致性&#xff08;Consistency)3.隔离性&#xff08;lsolation)4.持久性…
阅读更多...
数据结构奇妙旅程之二叉树初阶

数据结构奇妙旅程之二叉树初阶

꒰˃͈꒵˂͈꒱ write in front ꒰˃͈꒵˂͈꒱ ʕ̯•͡˔•̯᷅ʔ大家好&#xff0c;我是xiaoxie.希望你看完之后,有不足之处请多多谅解&#xff0c;让我们一起共同进步૮₍❀ᴗ͈ . ᴗ͈ აxiaoxieʕ̯•͡˔•̯᷅ʔ—CSDN博客 本文由xiaoxieʕ̯•͡˔•̯᷅ʔ 原创 CSDN …
阅读更多...
腾讯云添加SSL证书

腾讯云添加SSL证书

一、进入腾讯云SSL证书&#xff1a; ssl证书控制台地址 选择“我的证书”&#xff0c;点击"申请免费证书" 2、填写域名和邮箱&#xff0c;点击“提交申请” 在此页面中会出现主机记录和记录值。 2、进入云解析 DNS&#xff1a;云解析DNS地址 进入我的解析-记录…
阅读更多...
一、MySQL 卸载

一、MySQL 卸载

目录 1、软件的卸载准备 2、软件的卸载 方式一&#xff1a;通过控制面板卸载 方式二&#xff1a;通过mysql8的安装向导卸载 1、双击mysql8的安装向导 2、取消更新 3、选择要卸载的mysql服务器软件的具体版本 4、确认删除数据目录 5、执行删除 6、完成删除 3、清理残…
阅读更多...
verilog编程题

verilog编程题

verilog编程题 文章目录 verilog编程题序列检测电路&#xff08;状态机实现&#xff09;分频电路计数器译码器选择器加减器触发器寄存器 序列检测电路&#xff08;状态机实现&#xff09; module Detect_101(input clk,input rst_n,input data,o…
阅读更多...
机器人持续学习基准LIBERO系列4——robosuite最基本demo

机器人持续学习基准LIBERO系列4——robosuite最基本demo

0.前置 机器人持续学习基准LIBERO系列1——基本介绍与安装测试机器人持续学习基准LIBERO系列2——路径与基准基本信息机器人持续学习基准LIBERO系列3——相机画面可视化及单步移动更新 1.robosuite的相关资料 是基于MuJoCo的机器人学习方针环境&#xff0c;提供一套基准环境…
阅读更多...
《WebKit 技术内幕》之三（3）： WebKit 架构和模块

《WebKit 技术内幕》之三（3）： WebKit 架构和模块

3 Webkit2 3.1 Webkit2 架构及模块 相比于狭义的WebKit&#xff0c;WebKit2是一套全新的结构和接口&#xff0c;而并不是一个简单的升级版。Webkit2 的思想同 Chrominum 类似&#xff0c;就是将渲染过程放在单独的进程中来完成&#xff0c;独立于用户界面。 webKit2中…
阅读更多...
机器人领域顶刊TRO，TASE及RAL的区别与关系

机器人领域顶刊TRO，TASE及RAL的区别与关系

一、背景 机器人领域越来越火&#xff0c;特别是在具身智能的加持下&#xff0c;让机器人在不久的未来可以完成更多复杂的任务&#xff0c;进入到我们的日常生活&#xff08;不过应该还需要很长很长时间&#xff09;。作为机器人方向的Researcher&#xff0c;我们会看许多机器…
阅读更多...
未来科技五年人工智能行业产业发展趋势最新竞争力

未来科技五年人工智能行业产业发展趋势最新竞争力

人工智能&#xff08;Artificial Intelligence&#xff0c;AI&#xff09;是近年来快速发展的热门领域&#xff0c;被广泛应用于各个行业。随着技术的不断创新和突破&#xff0c;人工智能行业的竞争力也在不断提升。本文将分析未来科技五年人工智能行业产业发展趋势&#xff0c…
阅读更多...
【JavaEEj进阶】 Spring实现留言板

【JavaEEj进阶】 Spring实现留言板

文章目录 &#x1f38d;预期结果&#x1f340;前端代码&#x1f384;约定前后端交互接⼝&#x1f6a9;需求分析&#x1f6a9;接⼝定义 &#x1f333;实现服务器端代码&#x1f6a9;lombok &#x1f332;服务器代码实现&#x1f334;运⾏测试 &#x1f38d;预期结果 可以发布并…
阅读更多...
ssh远程访问及控制

ssh远程访问及控制

目录 一、ssh协议简介 1、实现远程访问的协议和程序 2、ssh协议的概念及功能 3、ssh协议的工作原理 3.1 对称加密与非对称加密 3.1.1 对称加密&#xff08;Symmetric Encryption&#xff09; 3.1.2 非对称加密&#xff08;Asymmetric Encryption&#xff09; 3.2 公钥传…
阅读更多...
微信商家转账到零钱怎么开通？场景模板

微信商家转账到零钱怎么开通？场景模板

商家转账到零钱是什么&#xff1f; 使用商家转账到零钱这个功能&#xff0c;可以让商户同时向多个用户的零钱转账。商户可以使用这个功能用于费用报销、员工福利发放、合作伙伴货款或分销返佣等场景&#xff0c;提高效率。 商家转账到零钱的使用场景有哪些&#xff1f; 商家…
阅读更多...
【生存技能】git操作

【生存技能】git操作

先下载git https://git-scm.com/downloads 我这里是win64&#xff0c;下载了相应的直接安装版本 64-bit Git for Windows Setup 打开git bash 设置用户名和邮箱 查看设置的配置信息 获取本地仓库 在git bash或powershell执行git init&#xff0c;初始化当前目录成为git仓库…
阅读更多...
最新文章
推荐文章

Copyright @ 2022~2023