---

前言

skywalking根据监控规则，通过webhook调后端微服务接口，从而发送告警邮件。

---

一、准备

根据上几章内容，保证skywalking能监控到linux数据：

根据上一章内容，启动微服务，保证skywalkingNotifyToQqEmail可用。

二、配置skywalking

2.1 修改alarm-settings.yml

cd /opt/skywalking/apache-skywalking-apm-bin/config
vim alarm-settings.yml

将hooks注释去掉，url修改为自己微服务地址。

新增1条监控规则，监控cpu使用率过高。为了测试，修改为超过20%则告警。

完整的配置文件：

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.# Sample alarm rules.
rules:# Rule unique name, must be ended with `_rule`.service_resp_time_rule:# A MQE expression, the result type must be `SINGLE_VALUE` and the root operation of the expression must be a Compare Operation# which provides `1`(true) or `0`(false) result. When the result is `1`(true), the alarm will be triggered.expression: sum(service_resp_time > 1000) >= 3period: 10silence-period: 5message: Response time of service {name} is more than 1000ms in 3 minutes of last 10 minutes.
#  service_resp_time_rule:
#    expression: avg(service_resp_time) > 1000
#    period: 10
#    silence-period: 5
#    message: Avg response time of service {name} is more than 1000ms in last 10 minutes.service_sla_rule:expression: sum(service_sla < 8000) >= 2# The length of time to evaluate the metricsperiod: 10# How many times of checks, the alarm keeps silence after alarm triggered, default as same as period.silence-period: 3message: Successful rate of service {name} is lower than 80% in 2 minutes of last 10 minutesservice_resp_time_percentile_rule:expression: sum(service_percentile{p='50,75,90,95,99'} > 1000) >= 3period: 10silence-period: 5message: Percentile response time of service {name} alarm in 3 minutes of last 10 minutes, due to more than one condition of p50 > 1000, p75 > 1000, p90 > 1000, p95 > 1000, p99 > 1000service_instance_resp_time_rule:expression: sum(service_instance_resp_time > 1000) >= 2period: 10silence-period: 5message: Response time of service instance {name} is more than 1000ms in 2 minutes of last 10 minutesdatabase_access_resp_time_rule:expression: sum(database_access_resp_time > 1000) >= 2period: 10message: Response time of database access {name} is more than 1000ms in 2 minutes of last 10 minutesendpoint_relation_resp_time_rule:expression: sum(endpoint_relation_resp_time > 1000) >= 2period: 10message: Response time of endpoint relation {name} is more than 1000ms in 2 minutes of last 10 minutescpu_usage_high_rule:# MQE 表达式，返回 1 (true) 或 0 (false) 的结果。这里表示当 CPU 利用率超过 20% 时，触发告警。expression: avg(meter_vm_cpu_total_percentage) > 20# 每隔 1 分钟评估一次period: 1# 静默时间，告警触发后 3 分钟内不重复发送silence-period: 3# 告警消息message: CPU usage of {name} is above 200%.
#  Active endpoint related metrics alarm will cost more memory than service and service instance metrics alarm.
#  Because the number of endpoint is much more than service and instance.
#
#  endpoint_resp_time_rule:
#    expression: sum(endpoint_resp_time > 1000) >= 2
#    period: 10
#    silence-period: 5
#    message: Response time of endpoint {name} is more than 1000ms in 2 minutes of last 10 minuteshooks:webhook:default:is-default: trueurls:- http://10.211.55.2:8001/api/test/skywalkingNotifyToQqEmail
#        - http://127.0.0.1/go-wechat/

2.2 重启skywalking

ps -ef | grep skywalking
kill 8295 8296
sh startup.sh

三、收到告警邮件

重启skywalking后，告警规则即生效。过一会就回收到告警邮件。

微服务日志里也会打印日志：

---

总结

如果收不到邮件，则从头检查下链路。